View SFH670005_4454848.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

SFH6700/01/02/05/11/12/19
Vishay Semiconductors
High Speed Optocoupler, 5 MBd, 1 kV/s dV/dt
FEATURES
* Data rate 5.0 MBits/s (2.5 MBit/s over temperature) * Buffer * Isolation test voltage, 5300 VRMS for 1.0 s * TTL, LSTTL and CMOS compatible * Internal shield for very high common mode transient immunity * Wide supply voltage range (4.5 to 15 V) * Low input current (1.6 mA to 5 mA) * Three state output (SFH6700/19) * Totem pole output (SFH6701/02/11/12) * Open collector output (SFH6705) * Lead (Pb)-free component * Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC
SFH6700/6719 NC 1 A2 C3 NC 4 8 VCC 7 VO 6 VE 5 GND
SFH6701/6711 NC 1 A2 C3 NC 4 SFH6705 NC 1 A C 2 3 8 VCC 7 NC 6 VO 5 GND 8 VCC 7 VO 6 NC 5 GND
SFH6702/6712 NC 1 A2 C3 NC 4 8 VCC 7 NC 6 VO 5 GND
i179073
NC 4
APPLICATIONS
* * * * * * * Industrial control Replace pulse transformers Routine logic interfacing Motion/power control High speed line receiver Microprocessor system interfaces Computer peripheral interfaces
DESCRIPTION
The SFH67xx high speed optocoupler series consists of a GaAlAs infrared emitting diode, optically coupled with an integrated photo detector. The detector incorporates a Schmitt-Trigger stage for improved noise immunity. Using the enable input, the output can switched to the high ohmic state, which is necessary for data bus applications. A Faraday shield provides a common mode transient immunity of 1000 V/ at VCM = 50 V for SFH6700/01/02/05 and 2500 V/ at VCM = 400 V for SFH6711/12/19. The SFH67xx uses an industry standard DIP-8 package. With standard lead bending, creepage distance and clearance of 7.0 mm with lead bending options 6, 7, and 9 8 mm are achieved.
AGENCY APPROVALS
* UL1577, file no. E52744 system code H or J, double protection * DIN EN 60747-5-2 (VDE 0884)/DIN EN 60747-5-5 pending available with option 1
ORDER INFORMATION
PART REMARKS SFH6700 Three state output, DIP-8 SFH6701 Totem pole output, DIP-8 SFH6702 Totem pole output, DIP-8 SFH6705 Open collector output, DIP-8 SFH6711 Totem pole output, DIP-8 SFH6712 Totem pole output, DIP-8 SFH6719 Three state output, DIP-8 SFH6700-X009 Three state output, SMD-8 (option 9) SFH6701-X006 Totem pole output, DIP-8 400 mil (option 6) SFH6701-X007 Totem pole output, SMD-8 (option 7) SFH6701-X009 Totem pole output, SMD-8 (option 9) SFH6705-X006 Open collector output, DIP-8 400 mil (option 6) SFH6705-X007 Open collector output, SMD-8 (option 7) SFH6711-X007 Totem pole output, SMD-8 (option 7) Note For additional information on the available options refer to option information. Document Number: 83683 Rev. 1.5, 15-Apr-05 For technical questions, contact: optocoupler.answers@vishay.com www.vishay.com 1
SFH6700/01/02/05/11/12/19
Vishay Semiconductors
TRUTH TABLE (Positive Logic)
PARTS SFH6700 SFH6719 SFH6701 SFH6702 SFH6705 SFH6711 SFH6712 IR DIODE on off on off on off on off on off on off on off ENABLE H H L L OUTPUT Z Z H L H L H L H L H L H L
High Speed Optocoupler, 5 MBd, 1 kV/s dV/dt
ABSOLUTE MAXIMUM RATINGS
PARAMETER INPUT Reverse voltage DC forward current Surge forward current Power dissipation OUTPUT Supply voltage Three state enable voltage (SFH6700/19 only) Output voltage Average output current Power dissipation COUPLER Storage temperature range Ambient temperature range Lead soldering temperature Isolation test voltage Pollution degree Creepage distance and clearance Comparative tracking index per DIN IEC 112/VDE 0303, part 1 Isolation resistance VIO = 500 V, Tamb = 25 C VIO = 500 V, Tamb = 100 C RIO RIO Standard lead bending Options 6, 7, 9 t = 10 s Tstg Tamb Tsld VISO - 55 to + 125 + 85 260 5300 2.0 7.0 8.0 175 1012 1011 mm mm C C C VRMS VCC VEN VO IO Pdiss - 0.5 to + 15 - 0.5 to + 15 - 0.5 to + 15 25 100 V V V mA mW t 1.0 s VR IF IFSM Pdiss 3.0 10 1.0 20 V mA A mW TEST CONDITION SYMBOL VALUE UNIT
Note Tamb = 25 C, unless otherwise specified. Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability.
www.vishay.com 2
For technical questions, contact: optocoupler.answers@vishay.com
Document Number: 83683 Rev. 1.5, 15-Apr-05
SFH6700/01/02/05/11/12/19
High Speed Optocoupler, 5 MBd, 1 kV/s dV/dt
Vishay Semiconductors
ICC IF A (2) IO IE (3) Shield VCC (8)
ICC A (2)
VO (7) VEN (6) GND (5)
IF IO
VCC (8) VO (6) GND (5)
K
K (3) Shield
SFH6700/19
SFH6702/12
ICC A (2) IF IO VCC (8)
ICC IF A (2)
VO (7)
VCC (8) IO VO (6)
K (3) Shield GND (5)
K (3) Shield GND (5)
SFH6701/11
SFH6705
isfh6700_01
Fig. 1 - Schematics
RECOMMENDED OPERATING CONDITIONS
PARAMETER Supply voltage Enable voltage high Enable voltage low Forward input current Operating temperature Output pull-up resistor Fan output RL = 1.0 k TEST CONDITION
(1)
PART SFH6700 SFH6719 SFH6700 SFH6719
SYMBOL VCC VEH VEH VEL VEL IFon IFoff Tamb
MIN. 4.5 2.0 2.0 0 0 1.6 (2) - 40 350
TYP.
MAX. 15 15 15 0.8 0.8 5.0 0.1 85 4 16
UNIT V V V V V mA mA C k LS TTL loads
SFH6705 SFH6705
RL N
Notes A 0.1 F bypass capacitor connected between pins 5 and 8 must be used. (2) We recommended using a 2.2 mA to permit at least 20 % CTR degradation guard band.
(1)
Document Number: 83683 Rev. 1.5, 15-Apr-05
For technical questions, contact: optocoupler.answers@vishay.com
www.vishay.com 3
SFH6700/01/02/05/11/12/19
Vishay Semiconductors
High Speed Optocoupler, 5 MBd, 1 kV/s dV/dt
(1)
ELECTRICAL CHARACTERISTICS
PARAMETER INPUT Forward voltage Input current hysteresis Reverse current Capacitance Thermal resistance OUTPUT Logic low output voltage Logic high output voltage (except SFH6705) Output leakage current (VOUT > VCC) (except SFH6705) Output leakage current (SFH6705 only) Logic high enable voltage (SFH6700/19 only) Logic low enable voltage (SFH6700/19 only) Logic high enable current (SFH6700/19 only) Logic low enable current (SFH6700/19 only)
TEST CONDITION IF = 5.0 mA IF = 5.0 mA VCC = 5.0 V, IHYS = IFon - IFon VR = 3.0 V VR = 0 V, f = 1 MHz
SYMBOL VF VF IHYS IR CO RthJA
MIN.
TYP. 1.6 0.1 0.5 60 700
MAX. 1.75 1.8 10
UNIT V V mA A pF K/W
IOL = 6.4 mA IOH = 2.6 mA, VOH = VCC - 1.8 V VO = 5.5 V, VCC = 4.5 V, IF = 5.0 mA VO = 15 V, VCC = 4.5 V, IF = 5.0 mA VO = 5.5 V, VCC = 5.5 V, IF = 5.0 mA VO = 15 V, VCC = 15 V, IF = 5.0 mA
VOL 2.4 IOHH IOHH IOHH IOHH VEH VEL 2.0 0.5 1.0 0.5 1.0
0.5
V V
100 500 100 500
A A A A V
0.8 20 100 0.001 - 320 - 20 20 100 0.001 3.7 4.1 3.4 3.7 25 40 - 10 - 25 300 500 6.0 6.5 4.0 5.0 - 50 250
V A A A A A A A A mA mA mA mA mA mA mA mA K/W
VEN = 2.7 V VEN = 5.5 V VEN = 15 V VEN = 0.4 V VO = 0.4 V, VEN = 2.0 V, IF = 5.0 mA
IEH IEH IEH IEL IOZL IOZH IOZH IOZH ICCL ICCL ICCH ICCH IOSL IOSL IOSL IOSL RthJA
High impedance state output current (SFH6700/19 only)
VO = 2.4 V, VEN = 2.0 V, IF = 0 mA VO = 5.5 V, VEN = 2.0 V, IF = 0 mA
Logic low supply current Logic high supply current Logic low short circuit output current (2) Logic high short circuit output current (2) Thermal resistance COUPLER Capacitance (input to output) Isolation resistance
VCC = 5.5 V, IF = 0 VCC = 15 V, IF = 0 VCC = 5.5 V, IF = 5.0 mA VCC = 15 V, IF = 5.0 mA VO = VCC = 5.5 V, IF = 0 VO = VCC = 15 V, IF = 0 VCC = 5.5 V, VO = 0 V, IF = 5.0 VCC = 15 V, VO = 0 V, IF = 5.0
f = 1 MHz, pins 1 to 4 and 5 to 8 shorted together VIO = 500 V, Tamb = 25 C VIO = 500 V, Tamb = 100 C
CIO RIO RIO 1012 1011
0.6
pF
Notes (1) - 40 C T amb 85 C; 4.5 V VCC 15 V; 1.6 mA IFon 5.0 mA; 2.0 VEH 15 V; 0 VEL 0.8 V; 0 mA IFoff 0.1 mA. Typical values: Tamb = 25 C; VCC = 5.0 V; IFon = 3.0 mA unless otherwise specified. Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering evaluation. Typical values are for information only and are not part of the testing requirements. (2) Output short circuit time 10 ms.
www.vishay.com 4
For technical questions, contact: optocoupler.answers@vishay.com
Document Number: 83683 Rev. 1.5, 15-Apr-05
SFH6700/01/02/05/11/12/19
High Speed Optocoupler, 5 MBd, 1 kV/s dV/dt
SWITCHING CHARACTERISTICS
PARAMETER Propagation delay time to logic low output level, SFH6700/01/02/11/12/19 (2) Output enable time to logic high (SFH6700/19) (2) Output enable time to logic low (SFH6700/19) (2) Output disable time from logic low (SFH6700/19) (2) Output rise time (2) Output fall time (2) Propagation delay time to logic low output level (3) 10 % to 90 % 90 % to 10 % Without peaking capacitor With peaking capacitor Without peaking capacitor With peaking capacitor Output rise time (3) 10 % to 90 % 90 % to 10 % SFH6705 SFH6705 SFH6705 SFH6705
(1)
Vishay Semiconductors
TEST CONDITION Without peaking capacitor With peaking capacitor
PART
SYMBOL tPHL tPHL tPLH tPLH tPZH tPZL tPLZ tr tf tPHL tPHL tPLH tPLH tr tr
MIN.
TYP. 120 115 125 90 20 25 50 40 10 115 105 125 90 25 4
MAX. 300 300
UNIT ns ns ns ns ns ns ns ns ns ns
300 300
ns ns ns ns ns
Notes (1) 0 C T amb 85 C; 4.5 V VCC 15 V; 1.6 mA IFon 5.0 mA; 2.0 VEH 15 V (SFH6700/19); 0 VEL 0.8 V (SFH6700/19); 0 mA IFoff 0.1 mA (2) Typical values: T (4) amb = 25 C; VCC = 5.0 V; IFon = 3.0 mA unless otherwise specified (3) Typical values: T (4) amb = 25 C, VCC = 5.0 V; IFon = 3.0 mA; RL = 390 unless otherwise specified (4) A 0.1 F bypass capacitor connected between pins 5 and 8 must be used
COMMON MODE TRANSIENT IMMUNITY
PARAMETER TEST CONDITION
(1)
PART SFH6700 SFH6701 SFH6702 SFH6705 SFH6711
SYMBOL |CMH| (2) |CMH| (2) |CMH| (2) |CMH| (2) |CMH| (2) |CMH| (2) |CMH| (2) |CML| (3) |CML| (3) |CML| (3) |CML| (3) |CML| (3) |CML| (3) |CML| (3)
MIN. 1000 1000 1000 1000 2500 2500 2500 1000 1000 1000 1000 2500 2500 2500
TYP.
MAX.
UNIT V/s V/s V/s V/s V/s V/s V/s V/s V/s V/s V/s V/s V/s V/s
|VCM| = 50 V, IF = 1.6 mA Logic high common mode transient immunity |VCM| = 400 V, IF = 1.6 mA |VCM| = 50 V, IF = 0 mA |VCM| = 50 V, IF = 0 mA
SFH6712 SFH6719 SFH6700 SFH6701 SFH6702 SFH6705 SFH6711
Logic Low common mode transient immunity
|VCM| = 400 V, IF = 0 mA
SFH6712 SFH6719
Notes (1) T amb = 25 C, VCC = 5.0 V (2) CM is the maximum slew rate of a common mode voltage V H CM at which the output voltage remains at logic high level (VO > 2.0 V) (3) CM is the maximum slew rate of a common mode voltage V L CM at which the output voltage remains at logic high level (VO < 0.8 V)
Document Number: 83683 Rev. 1.5, 15-Apr-05
For technical questions, contact: optocoupler.answers@vishay.com
www.vishay.com 5
SFH6700/01/02/05/11/12/19
Vishay Semiconductors
TYPICAL CHARACTERISTICS
Tamb = 25 C, unless otherwise specified
High Speed Optocoupler, 5 MBd, 1 kV/s dV/dt
150
5 VO - Output Voltage (V) Detector 4 3 2 1 IOL = 6.4 mA 0 0.0 0.1 0.2 0.3 0.4 IOH = - 2.6 mA VCC = 4.5 V
Ptot - Power dissipation (mW)
120 100 75 50 Emitter 25 0 - 60 - 40 - 20 0 20 40 60 80 100
0.5 0.6
0.7 0.8
0.9
1.0
isfh6700_02
Tamb - Temperature (C)
isfh6700_05
IF -Input Current (mA)
Fig. 2 - Permissible Total Power Dissipation vs. Temperature
Fig. 5 - Typical Output Voltage vs. Forward Input Current (except SFH6705)
10.000
6 5 VCC = 5 V
IF - Forward Current (mA)
VO - Output Voltage (V)
1.000
4 3 2 1 0 0.0 RL =1 to 4 k RL = 390
0.100
0.010 1.3
1.4
1.5
1.6
1.7
isfh6700_06
isfh6700_03
VF - Forward Voltage
0.2 0.4 0.6 0.8 IF - Forward Input Current (mA)
1.0
Fig. 3 - Typical Input Diode Forward Current vs. Forward Voltage
Fig. 6 - Typical Output Forward Voltage vs. Forward Input Current (only SFH6705)
1.75
ICC - Supply Curent (mA)
VF - Forward Voltage (V)
1.70 1.65 1.60 1.55 1.50 1.45 - 60
IF = 5 mA
4.2 4.0 3.8 3.6 3.4 3.2 - 60 - 40 - 20 0
ICCL at VCC = 15 V ICCH at VCC = 15 V & ICCL at VCC = 5.5 V ICCH at VCC = 5.5 V
- 40
- 20
0
20
40
60
80
100
20
40
60
80
100
isfh6700_04
Tamb - Temperature (C)
isfh6700_07
Tamb - Temperature (C)
Fig. 4 - Typical Forward Input Voltage vs. Temperature
Fig. 7 - Typical Supply Current vs. Temperature
www.vishay.com 6
For technical questions, contact: optocoupler.answers@vishay.com
Document Number: 83683 Rev. 1.5, 15-Apr-05
SFH6700/01/02/05/11/12/19
High Speed Optocoupler, 5 MBd, 1 kV/s dV/dt
Vishay Semiconductors
0 IOHH - Output Leakage Current (nA)
IOH - High Level Output Current - mA
1100 1000 900 800 700 600 500 400 - 60 - 40 - 20 0 VCC = VO = 5.5 V VCC = VO = 15 V
-1 -2 -3 -4 -5 -6 -7 -8 -60
VOH = 2.7 V
VCC = 4.5 V IF = 5 mA
VOH = 2.4 V
20 40
60
80 100
isfh6700_08
Tamb - Temperature (C)
-40
-20
0
20
40
60
80
100
isfh6700_11
Tamb - Temperature (C)
Fig. 8 - Typical Output Leakage Current vs. Temperature
Fig. 11 - Typical High Level Output Current vs. Temperature (except SFH6705)
40
IOL - Low Level Output Current (mA)
38 35 33 30 28 25 23
VCC = 5 V IF = 0 mA VOL = 0.8 V VOL = 0.6 V VOL = 0.4 V -40 -20 0 20 40 60 80 100
20 -60
isfh6700_09
Tamb - Temperature (C)
isfh6700_12
60 54 VCC = 5 V 48 IF = 3 mA 42 36 30 tR 24 18 12 tF 6 0 -60 -40 -20 0 20 40 60 Tamb - Temperature (C)
tR, tF -Rise, Fall Time - ns
80
100
Fig. 9 - Typical Low Level Output Current vs. Temperature
Fig. 12 - Typical Rise, Fall Time vs. Temperature (except SFH6705)
0.30
tPLH - Propagation Delay - ns
150 VCC = 5 V C = 15 pF (without peaking capacitor) 130 IF = 3 mA 110 IF = 5 mA 90 70 -60 IF = 1.6 mA
VOL - Low Level Output Voltage - V
0.25 0.20 0.15 0.10 0.05 -60
VCC = 5 V IF = 0 mA IO = 16 mA IO = 12.8 mA IO = 9.6 mA IO = 6.4 mA -40 -20 0 20 40 60 80 100
-40
-20
0
20
40
60
80
100
isfh6700_10
Tamb - Temperature (C)
isfh6700_13
Tamb - Temperature (C)
Fig. 10 - Typical Low Level Output Voltage vs. Temperature
Fig. 13 - Typical Propagation Delay to Logic High vs. Temperature (except SFH6705)
Document Number: 83683 Rev. 1.5, 15-Apr-05
For technical questions, contact: optocoupler.answers@vishay.com
www.vishay.com 7
SFH6700/01/02/05/11/12/19
Vishay Semiconductors
High Speed Optocoupler, 5 MBd, 1 kV/s dV/dt
tPHL - Propagation Delay - ns
tPLH - Propagation Delay - ns
180 160 140 120 100 80 60 -60 IF = 1.6 mA IF = 5 mA IF = 3 mA VCC = 5 V C1 = 15 pF (without peaking capacitor)
VCC = 15 V C1 = 15 pF (without peaking capacitor) 90 80 70 60 50 -60 -40 -20 0 20 40
IF = 1.6 mA
IF = 3 mA IF = 5 mA
-40
isfh6700_14
-20 0 20 40 60 Tamb - Temperature (C)
80
100
60
80
100
isfh6700_17
Tamb - Temperature (C)
Fig. 14 - Typical Propagation Delay to Logic Low vs. Temperature (except SFH6705)
Fig. 17 - Typical Propagation Delays to Logic High vs. Temperature
tPLH - Propagation Delay - ns
100 90 80 70 60 50 -60 IF = 1.6, 3 and 5 mA VCC = 5 V C1 = 120 pF (without peaking capacitor)
tPHL - Propagation Delay - ns
170 150 130 110 90 IF = 1.6 mA 70 50 -60 IF = 5 mA IF = 3 mA VCC = 5 V C1 = 15 pF (without peaking capacitor)
-40
-20
0
20
40
60
80
100
isfh6700_15
Tamb - Temperature (C)
-40
-20
0
20
40
60
80
100
isfh6700_18
Tamb - Temperature (C)
Fig. 15 - Typical Propagation Delays to Logic High vs. Temperature (except SFH6705)
Fig. 18 - Typical Propagation Delays to Logic Low vs.Temperature
tPLH - Propagation Delay - ns
tPHL - Propagation Delay - ns
170 150 130 110 90 70 50 -60 IF = 5 mA IF = 1.6 mA IF = 3 mA VCC = 5 V C1 = 120 pF (without peaking capacitor)
80 70 60 50 40 30 -60 IF = 1.6, 3 and 5 mA VCC = 5 V C1 = 120 pF (without peaking capacitor)
-40
-20
0
20
40
60
80
100
-40
-20
0
20
40
60
80
100
isfh6700_16
Tamb - Temperature (C)
isfh6700_19
Tamb - Temperature (C)
Fig. 16 - Typical Propagation Delay to Logic Low vs. Temperature
Fig. 19 - Typical Propagation Delays to Logic High vs. Temperature
www.vishay.com 8
For technical questions, contact: optocoupler.answers@vishay.com
Document Number: 83683 Rev. 1.5, 15-Apr-05
SFH6700/01/02/05/11/12/19
High Speed Optocoupler, 5 MBd, 1 kV/s dV/dt
Vishay Semiconductors
180
tPHL -Propagation Delay - ns
250
160 140 120 100 80 60 -60
C1 = 120 pf (Peaking Capacitor is used)
tP - Propagation Delay - ns
VCC = 15 V
VCC = 5 V 200 tPLH at R L = 4 k 150 100 tPLH at R L = 35 k 50 1 3 5 7 9 11 IF - Pulse Input Current - mA tPLH at R L = 1 k tPHL at R L = 350 - 4 k
IF = 5 mA IF = 3 mA IF = 1.6 mA -40 -20 0 20 40 60 80 100
isfh6700_20
Tamb - Temperature (C)
isfh6700_23
Fig. 20 - Typical Propagation Delays to Logic Low vs. Temperature (except SFH6705)
Fig. 23 - Typical Propagation Delays vs. Pulse Input Current (only SFH6705)
80 70
tp - Enable Propagation Delay - ns
CL = 15 pF VCC = 15 V tPLZ VCC = 4.5 V
tPLH - Propagation Delay - ns
220 200 180 160 140 120 100
VCC = 5 V IF = 3 mA RL = 4 k RL = 1 k
60 50 40 30 20 10 0 -60 tPZL VCC = 4.5 -15 V
RL = 350k -40 -20 0 20 40 60 80 100
-40
isfh6700_21
-20 0 20 40 60 Tamb - Temperature (C)
80
100
80 -60
isfh6700_24
TA - Temperature - C
Fig. 21 - Typical Logic Low Enable Propagation Delays vs. Temperature (only SFH6700/11)
Fig. 24 - Typical Propagation Delays to High Level vs. Temperature (only SFH6705)
tP - Enable Propagation Delay - ns
70 60 50 40 30 20 10 0 -60
CL = 15 pF VCC = 4.5 V tPHZ tPZH
tPHL - Propagation Delay - ns
80
140 130 120 110 100 90 80 70
VCC = 5 V RL = 350 - 4 k IF = 5 mA IF = 3 mA IF = 1.6 mA
VCC = 4.5 V -15 V VCC = 15 V -40 -20 0 20 40 60
tPHZ 80 100
-60
isfh6700_25
-40
-20
0
20
40
60
80
100
isfh6700_22
Tamb - Temperature (C)
TA - Temperature - C
Fig. 22 - Typical Logic High Enable Propagation Delays vs. Temperature (only SFH6700/11)
Fig. 25 - Typical Propagation Delays to Low Level vs. Temperature (only SFH6705)
Document Number: 83683 Rev. 1.5, 15-Apr-05
For technical questions, contact: optocoupler.answers@vishay.com
www.vishay.com 9
SFH6700/01/02/05/11/12/19
Vishay Semiconductors
High Speed Optocoupler, 5 MBd, 1 kV/s dV/dt
250 tR, tF -Rise, Fall Time - ns 225 200 50 25 0 tF @ RL = 350-4 k -25 -60
isfh6700_26
VCC = 5V
tR @ RL = 4 k
tR @ RL = 1 k tR @ RL = 350 k
-40
-20
0
20
40
60
80
100
TA - Temperature - C
Fig. 26 - Typical Rise, Fall Time vs. Temperature (only SFH6705)
5V R3 = 619 Pulse generator tr, tf = 5 ns f = 100 kHz 10% Duty cycle Input IF Monitoring Node Output Vo Monitoring Node
VCC
IF
1 2 3 4
VCC 8 Out* 7 En* Gnd 6 5
D1
0.1 F Bypass
D2 D3 D4
R1 C1 = 120 pF The Probe and Jig Capacitances are included in C1 and C2 R1 IF (ON) 2.15 k 1.6 mA 1.1 k 3 mA 681 5 mA
C2 = 15 pF R2 = 5 k All diodes are 1N916 or 1N3064 * SFH6701/02/11/12 without VEN * SFH6702/12 Pin 6 VOUT and Pin 7 NC IFon 50 % IFon 0 mA VOH
Input IF
Output VO
1.3 V
VOL
isfh6700_27
tPLH
tPHL
Fig. 27 Test Circuit for tPLH, tPHL, tr and tf
www.vishay.com 10
For technical questions, contact: optocoupler.answers@vishay.com
Document Number: 83683 Rev. 1.5, 15-Apr-05
SFH6700/01/02/05/11/12/19
High Speed Optocoupler, 5 MBd, 1 kV/s dV/dt
Vishay Semiconductors
VCC
5V
Pulse generator tr, tf = 5 ns Zo = 50 Input IF Monitoring Node
RL IF 1 2 3 4 VCC 8 NC 7 VOUT 6 5 0.1 F Bypass
Output VO Monitoring Node C2 = 15 pF
Gnd
R1 C1 = 120 pF The Probe and Jig Capacitances are included in C1 and C2 R1 IF (ON) 2.15 k 1.6 mA 1.1 k 3 mA 681 5 mA IFon 50 % IFon 0 mA VOH Output VO 1.3 V VOL
Input IF
isfh6700_28
tPLH
tPHL
Fig. 28 Test Circuit for tPLH, tPHL, tr and - SFH6705
VCC
Pulse generator ZO = 50 tr, tf = 5 ns VCC 8 Out 7 En Gnd 6 5
5V
IF Input VC Monitoring Node
1 2 3 4
Output VO S1 Monitoring Node 619 D1
5 k 0.1 F C1 Bypass
D2 D3 D4 S2
C1 = 15 pF including Probe and Jig Capacitances All diodes are 1N916 or 1N3064 3.0 V 1.3 V 0V 1.3 V t PZL S1 open Output VO S2 closed
isfh6700_29
Input VEN
Output VO S1 closed S2 open
0.5 V S1 and S2 closed VOL tPLZ 0.5 V
1.3 V 0V t PZH t PHZ
VOH
ca. 1.5 V S1 and S2 closed
Fig. 29 Test Circuit for tPHZ, tPZH, tPLZ and tPZL - SFH6700/19
Document Number: 83683 Rev. 1.5, 15-Apr-05
For technical questions, contact: optocoupler.answers@vishay.com
www.vishay.com 11
SFH6700/01/02/05/11/12/19
Vishay Semiconductors
High Speed Optocoupler, 5 MBd, 1 kV/s dV/dt
VCC
1 A 2 R B 3 4
Vcc 8 Out* 7 En* Gnd - VCM 6 5
Output VO Monitoring Node 0.1 F Bypass
+ Pulse Generator
* SFH6701/02/11/12 without VEN * SFH6702/12 Pin 6 VOUT and Pin 7 NC 400 V / 50 V VCM 0V Switch at A: IF = 1.6 mA VO (min.) Output VO
isfh6700_30
VOH
VOL
VO (max.) Switch at B: IF = 0 mA
Fig. 30 Test Circuit for Common Mode Transient Immunity and Typical Waveforms - SFH6700/01/02/11/12/19
VCC
5V
1 A 2 R B 3 4 + Pulse Generator
8 n.c. 7 Out Gnd - VCM 6 5
0.1F Bypass
RL Output VO Monitoring Node
50 V VCM 0V Switch at A: IF = 1.6 mA VO (min) Output VO VOL
isfh6700_31
VOH
VO (max) Switch at B: IF = 0 mA
Fig. 31 Test Circuit for Common Mode Transient Immunity and Typical Waveforms - SFH6705
www.vishay.com 12
For technical questions, contact: optocoupler.answers@vishay.com
Document Number: 83683 Rev. 1.5, 15-Apr-05
SFH6700/01/02/05/11/12/19
High Speed Optocoupler, 5 MBd, 1 kV/s dV/dt
PACKAGE DIMENSIONS in inches (millimeters)
Pin one ID 4 0.255 (6.48) 0.268 (6.81) 5 6 7 8
ISO Method A
Vishay Semiconductors
3
2
1
0.379 (9.63) 0.390 (9.91) 0.030 (0.76) 0.045 (1.14) 4 Typ. 0.130 (3.30) 0.150 (3.81) 0.050 (1.27) 0.018 (0.46) 0.022 (0.56)
i178006
0.300 (7.62) 0.031(0.79) Typ.
10 0.020 (0.51) 0.035 (0.89) 0.100 (2.54) Typ. 3 to 9 0.008 (0.20) 0.012 (0.30)
0.110 (2.79) 0.130 (3.30)
0.230 (5.84) 0.250 (6.35)
Option 6
0.407 (10.36) 0.391 (9.96) 0.307 (7.8) 0.291 (7.4) 0.028 (0.7) min.
Option 7
0.300 (7.62) typ.
Option 9
0.375 (9.53) 0.395 (10.03) 0.300 (7.62) ref.
0.180 (4.6) 0.160 (4.1) 0.0040 (0.102)
0.315 (8.0) min. 0.014 (0.35) 0.010 (0.25) 0.400 (10.16) 0.430 (10.92) 0.331 (8.4) min. 0.406 (10.3) max.
0.0098 (0.249)
0.020 (0.51) 0.040 (1.02)
0.012 (0.30 ) typ.
0.315 (8.00) min.
15 max.
18450
Document Number: 83683 Rev. 1.5, 15-Apr-05
For technical questions, contact: optocoupler.answers@vishay.com
www.vishay.com 13
SFH6700/01/02/05/11/12/19
Vishay Semiconductors
High Speed Optocoupler, 5 MBd, 1 kV/s dV/dt
OZONE DEPLETING SUBSTANCES POLICY STATEMENT
It is the policy of Vishay Semiconductor GmbH to 1. Meet all present and future national and international statutory requirements. 2. Regularly and continuously improve the performance of our products, processes, distribution and operating systems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances (ODSs). The Montreal Protocol (1987) and its London Amendments (1990) intend to severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances. Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents. 1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively. 2. Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental Protection Agency (EPA) in the USA 3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C (transitional substances) respectively. Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances.
We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use Vishay Semiconductors products for any unintended or unauthorized application, the buyer shall indemnify Vishay Semiconductors against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany
www.vishay.com 14
For technical questions, contact: optocoupler.answers@vishay.com
Document Number: 83683 Rev. 1.5, 15-Apr-05
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000 Revision: 18-Jul-08
www.vishay.com 1

▲Up To Search▲

Price & Availability of SFH670005

	To Download SFH670005 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .